Hack #1: Use CDPATH to define the base directory for cd command
If you are frequently doing cd to subdirectories of a specific parent directory, you can set the CDPATH to the parent directory and perform cd to the subdirectories without giving the parent directory path as explained below.
[ramesh@dev-db ~]# pwd /home/ramesh [ramesh@dev-db ~]# cd mail -bash: cd: mail: No such file or directory [Note: This is looking for mail directory under current directory] [ramesh@dev-db ~]# export CDPATH=/etc [ramesh@dev-db ~]# cd mail [Note: This is looking for mail under /etc and not under current directory] [ramesh@dev-db /etc/mail]# pwd /etc/mail
To make this change permanent, add export CDPATH=/etc to your ~/.bash_profile
This hack can be very helpful under the following situations:
- Oracle DBAs frequently working under $ORACLE_HOME, can set the CDPATH variable to the oracle home
- Unix sysadmins frequently working under /etc, can set the CDPATH variable to /etc
- Developers frequently working under project directory /home/projects, can set the CDPATH variable to /home/projects
- End-users frequently accessing the subdirectories under their home directory, can set the CDPATH variable to ~ (home directory)
Hack #2: Use cd alias to navigate up the directory effectively
When you are navigating up a very long directory structure, you may be using cd ..\..\ with multiple ..\’s depending on how many directories you want to go up as shown below.
# mkdir -p /tmp/very/long/directory/structure/that/is/too/deep # cd /tmp/very/long/directory/structure/that/is/too/deep # pwd /tmp/very/long/directory/structure/that/is/too/deep # cd ../../../../ # pwd /tmp/very/long/directory/structure
Instead of executing cd ../../../.. to navigate four levels up, use one of the following alias methods:
Navigate up the directory using ..n : In the example below, ..4 is used to go up 4 directory level, ..3 to go up 3 directory level, ..2 to go up 2 directory level. Add the following alias to the .bash_profile and re-login.
Navigate up the directory using ..n : In the example below, ..4 is used to go up 4 directory level, ..3 to go up 3 directory level, ..2 to go up 2 directory level. Add the following alias to the .bash_profile and re-login.
alias ..="cd .."
alias ..2="cd ../.."
alias ..3="cd ../../.."
alias ..4="cd ../../../.."
alias ..5="cd ../../../../.."
# cd /tmp/very/long/directory/structure/that/is/too/deep
#..4
[Note: use ..4 to go up 4 directory level]
# pwd
/tmp/very/long/directory/structure/Navigate up the directory using only dots: In the example below, ….. (five dots) is used to go up 4 directory level. Typing 5 dots to go up 4 directory structure is really easy to remember, as when you type the first two dots, you are thinking “going up one directory”, after that every additional dot, is to go one level up. So, use …. (four dots) to go up 3 directory level and .. (two dots) to go up 1 directory level. Add the following alias to the .bash_profile and re-login for the ….. (five dots) to work properly.
alias ..="cd .."
alias ...="cd ../.."
alias ....="cd ../../.."
alias .....="cd ../../../.."
alias ......="cd ../../../../.."
# cd /tmp/very/long/directory/structure/that/is/too/deep
# .....
[Note: use ..... (five dots) to go up 4 directory level]
# pwd
/tmp/very/long/directory/structure/Navigate up the directory using cd followed by consecutive dots: In the example below, cd….. (cd followed by five dots) is used to go up 4 directory level. Making it 5 dots to go up 4 directory structure is really easy to remember, as when you type the first two dots, you are thinking “going up one directory”, after that every additional dot, is to go one level up. So, use cd…. (cd followed by four dots) to go up 3 directory level and cd… (cd followed by three dots) to go up 2 directory level. Add the following alias to the .bash_profile and re-login for the above cd….. (five dots) to work properly.
alias cd..="cd .."
alias cd...="cd ../.."
alias cd....="cd ../../.."
alias cd.....="cd ../../../.."
alias cd......="cd ../../../../.."
# cd /tmp/very/long/directory/structure/that/is/too/deep
# cd.....
[Note: use cd..... to go up 4 directory level]
# pwd
/tmp/very/long/directory/structureHack #3: Perform mkdir and cd using a single command
Sometimes when you create a new directory, you may cd to the new directory immediately to perform some work as shown below.
# mkdir -p /tmp/subdir1/subdir2/subdir3 # cd /tmp/subdir1/subdir2/subdir3 # pwd /tmp/subdir1/subdir2/subdir3
Wouldn’t it be nice to combine both mkdir and cd in a single command? Add the following to the .bash_profile and re-login.
function mkdircd () { mkdir -p "$@" && eval cd "\"\$$#\""; }Now, perform both mkdir and cd at the same time using a single command as shown below:
# mkdircd /tmp/subdir1/subdir2/subdir3
[Note: This creates the directory and cd to it automatically]
# pwd
/tmp/subdir1/subdir2/subdir3Hack #4: Use “cd -” to toggle between the last two directories
You can toggle between the last two current directories using cd – as shown below.
# cd /tmp/very/long/directory/structure/that/is/too/deep # cd /tmp/subdir1/subdir2/subdir3 # cd - # pwd /tmp/very/long/directory/structure/that/is/too/deep # cd - # pwd /tmp/subdir1/subdir2/subdir3 # cd - # pwd /tmp/very/long/directory/structure/that/is/too/deep
Note: You can also substitute an argument from other commands in the history to the cd command using example#12 and #13 mentioned in the command line history examples article.
Hack #5: Use dirs, pushd and popd to manipulate directory stack
You can use directory stack to push directories into it and later pop directory from the stack. Following three commands are used in this example.
- dirs: Display the directory stack
- pushd: Push directory into the stack
- popd: Pop directory from the stack and cd to it
Dirs will always print the current directory followed by the content of the stack. Even when the directory stack is empty, dirs command will still print only the current directory as shown below.
# popd -bash: popd: directory stack empty # dirs ~ # pwd /home/ramesh
How to use pushd and popd? Let us first create some temporary directories and push them to the directory stack as shown below.
# mkdir /tmp/dir1
# mkdir /tmp/dir2
# mkdir /tmp/dir3
# mkdir /tmp/dir4
# cd /tmp/dir1
# pushd .
# cd /tmp/dir2
# pushd .
# cd /tmp/dir3
# pushd .
# cd /tmp/dir4
# pushd .
# dirs
/tmp/dir4 /tmp/dir4 /tmp/dir3 /tmp/dir2 /tmp/dir1
[Note: The first directory (/tmp/dir4) of the dir command output is always
the current directory and not the content from the stack.]At this stage, the directory stack contains the following directories:
/tmp/dir4 /tmp/dir3 /tmp/dir2 /tmp/dir1
The last directory that was pushed to the stack will be at the top. When you perform popd, it will cd to the top directory entry in the stack and remove it from the stack. As shown above, the last directory that was pushed into the stack is /tmp/dir4. So, when we do a popd, it will cd to the /tmp/dir4 and remove it from the directory stack as shown below.
# popd # pwd /tmp/dir4 [Note: After the above popd, directory Stack Contains: /tmp/dir3 /tmp/dir2 /tmp/dir1] # popd # pwd /tmp/dir3 [Note: After the above popd, directory Stack Contains: /tmp/dir2 /tmp/dir1] # popd # pwd /tmp/dir2 [Note: After the above popd, directory Stack Contains: /tmp/dir1] # popd # pwd /tmp/dir1 [Note: After the above popd, directory Stack is empty!] # popd -bash: popd: directory stack empty
Hack #6: Use “shopt -s cdspell” to automatically correct mistyped directory names on cd
Use shopt -s cdspell to correct the typos in the cd command automatically as shown below. If you are not good at typing and make lot of mistakes, this will be very helpful.
# cd /etc/mall
-bash: cd: /etc/mall: No such file or directory
# shopt -s cdspell
# cd /etc/mall
# pwd
/etc/mail
[Note: By mistake, when I typed mall instead of mail,
cd corrected it automatically]
